Oli e khethehileng bakeng sa pompo ea vacuum ea screw
Tlhaloso e Khutšoanyane:
Boemo ba setlolo bo tla fetoha ho latela matla a ho kenya le ho jarolla ha compressor ea moea, mocheso oa ts'ebetso, motsoako oa oli ea pele ea setlolo le masala a eona, jj.
Selelekela sa Sehlahisoa
Ho tsitsa ha oksijene hantle ho eketsa bophelo ba sistimi.
●Ho feto-fetoha ho tlase ho fokotsa litšenyehelo tsa tlhokomelo le ho tlatsa hape.
●Matla a matle a ka ntlafatsa bokgoni ba mosebetsi le ho fokotsa ditjeo tsa tshebetso.
●Ts'ebetso e ntle ea ho thibela emulsification le karohano e ntle ea oli le metsi.
●Oli ea motheo e nang le ho se tšabe metsi le khatello e tlase ea mouoane e tletseng sehlahisoa e etsa bonnete ba hore pompo e ka fumana vacuum e phahameng kapele.
● E sebetsang: potoloho: 5000-7000H.
●E sebetsang: mocheso: 85-105.
Morero
| MORERO LEBITSO | YUNITI | LITLHAKISO | E LEKISITSOE Lintlha | TEKO MOKHOA |
| Ponahalo | Ha e na 'mala ho isa ho mosehla o bosootho | Bosehla bo bosootho | Bosehla bo bosootho | |
| Ho thibana ha | Sehlopha sa SO | 46 | ||
| bongata | 250C,kg/l | 0.854 | ASTM D4052 | |
| viscosity ea kinematic @ 40℃ | mm²/s | 41.4-50.6 | 45.5 | ASTM D445 |
| ntlha e phatsimang, (ho bula) | ℃ | >220 | 240 | ASTM D92 |
| ntlha ea ho tšela | ℃ | <-21 | -35 | ASTM D97 |
| Thepa ea ho thibela bubble | ml/ml | <50/0 | 0/0,0/0,0/0 | ASTM D892 |
| boleng bohle ba asiti | mgKOH/g | 0.1 | ASTM D974 | |
| (40-57-5) @ 54°℃ Ho thibela emulsification | motsotso | <30 | 10 | ASTMD1401 |
| Teko ea mafome | pasa | pasa | ASTM D665 |
Bophelo ba Shelofo：Nako ea ho boloka e ka ba likhoeli tse ka bang 60 boemong ba eona ba pele, bo koetsoeng, bo omileng le bo se nang serame.
Litlhaloso tsa sephutheloana：Libarele tse 1L, 4L, 5L, 18L, 20L, 200L
